Compare models
Claude Opus 5 vs Claude Sonnet 5
By Ofrai Editorial (Model Testing Team)
Use Claude Sonnet 5 for almost everything and Claude Opus 5 only for the small share of work where a wrong answer is expensive — the two are tiers of the same family, not rival models. Sonnet 5 is the balanced tier most professional work should run on; Opus 5 is the frontier tier you reserve for decisions, root causes and sign-off. Both are standard chat models in Ofrai Text Studio on one shared credit balance, so testing the step up costs one extra generation.
Chat and video use credits from your Ofrai balance.
What the step up to Opus 5 actually buys
Opus 5 is Anthropic's frontier tier and Sonnet 5 is the balanced tier beneath it, so the step up buys depth in three specific places: work where several constraints conflict and someone has to decide which one to give up; work built from a long chain of dependent steps where each one must build on the last; and the final judgement pass on a deliverable that will be acted on without a second reading.
Everything else — prose quality, following a stated format, code that looks like the code around it — Sonnet 5 already delivers at a lower price band and a faster response. If your hard prompts do not fall into those three categories, the tier gap will not show up in the output.
The jobs Sonnet 5 is already good enough for
Sonnet 5 handles professional drafting, editing and summarising, document and email work with a long list of specific constraints to honour, code explanation, generation and review at ordinary complexity, and analysis with a handful of steps. Those jobs are most of a working week. Its documented weaknesses sit at the frontier edge — the hardest reasoning, the cases where an error is expensive — so if your work does not sit there, the higher tier is buying a more elegant answer to a question you did not really have.
On Ofrai both models are standard chat models on the same shared credit balance, which makes this comparison one extra generation rather than a second subscription.
Cost per finished piece, not per call
The wrong question is which model costs less per call, because a cheaper model that needs three rounds of correction is the more expensive one. Measure the credit cost of a finished piece of accepted work instead: credits spent divided by output you kept. A frontier-tier answer that lands on the first pass is cheaper by that measure than a balanced-tier answer you rewrote twice.
Sonnet 5 is the cheaper model to run repeatedly, and Text Studio shows the credit cost of each request before you send it, so logging both numbers for a week tells you where your spend actually is.
How to test the step up on your own prompts
Take ten prompts you actually sent in the last fortnight, including the two that annoyed you most, and run each on Sonnet 5 and on Opus 5. Grade three things: how many attempts it took before you kept the output, whether the answer followed every constraint you listed, and whether you had to add a caveat it missed. Then count how many of the ten Opus 5 finished on the first pass — that number, not a feature comparison, decides whether the frontier tier belongs in your workflow.
Re-run the same ten a month later, because the balance shifts as your prompting improves.
Where Sonnet 5 visibly fails and you should stop fighting it
Some cases are not worth pushing Sonnet 5 on: a subtle bug that has already resisted three attempts, an architectural decision that would be expensive to reverse, a conflict between requirements where being wrong has a real cost, or thin evidence that the model is filling in smoothly. Escalate in those cases instead of rephrasing. Sonnet 5 does not fail by being slower — it fails by being plausible at a level of detail that conceals the gap, which is precisely what makes it dangerous there.
Opus 5 is the tier to pay for when being wrong is the expensive outcome.
Where Opus 5 wastes the money
Opus 5 is the wrong spend on high-volume routine work, quick lookups that do not justify their cost, long mechanical transformations — forty-item lists, exhaustive audits, repetitive passes where every row follows the same rule — and anything you plan to discard and re-run. It starts well and holds a good structure for a while, then drifts on the tail items and sometimes substitutes a summary for finishing, so the tail is exactly where the expensive tier stops paying for itself. Route those down.
The money is better spent on the two or three outputs a week that other people actually act on.
A routing rule you can write on a sticky note
Draft, rewrite, summarise, format, explain, and anything you could have asked a competent colleague — Sonnet 5. Decide, arbitrate between conflicting requirements, trace a root cause, sign off on something that leaves without a second reader — Opus 5. Everything in between, including bulk classification, mass formatting and any task where the fastest acceptable answer matters more than the best one, belongs on a cheaper tier again, such as the smaller Claude model in the same family, which Ofrai also lists.
One rule applied without thinking saves more credits than any prompt trick.
Failure modes specific to Opus 5
The characteristic Opus 5 failure is quiet over-compliance: it delivers the structure, length and register you asked for and drops the one hard caveat you mentioned in the last paragraph. Its second failure is confident completeness — when the evidence is thin it fills the gap smoothly instead of naming what is missing, and at this tier the prose is polished enough to make that dangerous.
Ask it to list every claim it could not verify and to say what is missing before answering, and keep a human on the last pass of anything a customer will read.
Failure modes specific to Sonnet 5
Sonnet 5's characteristic failure is a plausible answer at the wrong depth: it will explain a thing correctly and shallowly, and it tends to accept your framing rather than challenge it. In a long thread it honours the newest instruction and forgets an older one, so a constraint stated ten messages ago quietly stops applying. It also answers the neighbouring question you did not ask, at the same length as the real one.
Restate the constraint that matters before each new request, and ask it to rank the serious problems rather than list everything.
Claude Opus 5 vs Claude Sonnet 5 for coding
For reading unfamiliar code, explaining what it does, writing tests, ordinary refactoring and review at normal complexity, Sonnet 5 is the right tier and the cheaper one. For a cause that has to be traced rather than guessed, a subtle bug involving overlapping tasks or security that survived earlier attempts, and a design decision you would not want to redo, Opus 5 earns its cost. Ask both for a diff rather than a wall of code.
A workable split is to draft and iterate on Sonnet 5, then send the finished diff to Opus 5 for the review that goes into the ticket.
Switching tiers inside one thread
Both models are standard chat models in Ofrai Text Studio drawing on the same shared credit balance, and you can switch between them inside a single thread — context and history carry across, so the expensive part, everything already established about the task, is not thrown away. The usual pattern is to explore and draft on Sonnet 5, escalate to Opus 5 for the final judgement or the write-up, then bring the result back for a cheaper trimming pass if it needs one.
That is the entire cost-control mechanism; there is no billing decision to make per request.
When a different model beats both
Neither tier is the answer when the deciding factor is volume or latency rather than depth. For bulk classification, formatting and extraction across thousands of items, a smaller model in the same family is the right instrument; for interactive work where the fastest acceptable answer matters more than the best one, a cheaper tier from any lab will beat both on responsiveness.
And if you find yourself escalating the same prompt to Opus 5 every single time, the honest read is that the workflow needs better inputs rather than a more expensive tier.
Ofrai credit prices
Scores are editorial estimates from in-house tests — not third-party benchmarks.
| Model | Kind | Credits |
|---|---|---|
| Claude Opus 5 | Chat model | Input/Output 1.37136/6.8568 |
| Claude Sonnet 5 | Chat model | Input/Output 0.822816/4.11408 |
FAQ
- Is Claude Opus 5 worth the extra cost over Claude Sonnet 5?
- Worth it in a small, identifiable share of your work: conflicting constraints that need arbitrating, long chains of dependent steps, root causes that must be traced rather than guessed, and final sign-off on something that ships without a second reader. Everything else — drafting, editing, summarising, ordinary coding — Sonnet 5 already does well at a lower price band. Test it rather than assume: run ten of your own real prompts on both and count how many Opus 5 finished on the first pass.
- Is Claude Sonnet 5 good enough for most work?
- For most professional work, yes. Sonnet 5 is Anthropic's balanced tier and is designed for drafting, editing, summarising, constraint-heavy documents and code at ordinary complexity, which covers most of a working week. It is not the right tier when an error would be genuinely expensive: subtle bugs, irreversible design calls, thin evidence. Its documented strength is following specific constraints, which is what makes its output usable as a real deliverable rather than only as an answer.
- Do I need two subscriptions to compare Opus 5 and Sonnet 5?
- No. Both are listed as standard chat models in Ofrai Text Studio and both draw on the same shared credit balance. Open Text Studio, send the same prompt to Claude Opus 5 and Claude Sonnet 5, and compare without managing two accounts, two keys or two invoices. There is no separate subscription for either tier. Cost control comes from routing each request to the tier that suits it, not from separate billing.
- Which is better for coding, Opus 5 or Sonnet 5?
- Sonnet 5 for explanation, code generation, tests, ordinary refactoring and review at normal complexity. Opus 5 for the bug that resisted three attempts, the subtle problem involving overlapping tasks or security, and the architecture decision you would not want to redo. Ask both for a diff rather than a wall of code. The economical split is to draft and iterate on Sonnet 5 and send the finished diff to Opus 5 for the review that ends up in the ticket.
- How do I switch between the two tiers in the middle of a task?
- Switch inside the same Text Studio thread. Context and history carry across the switch, so everything you have already worked out about the task stays in place — which is the expensive part and the part you would hate to lose. The common pattern is to explore and draft on Sonnet 5, escalate to Opus 5 for the judgement or the final write-up, then return to Sonnet 5 if the result needs trimming. It all runs on one credit balance.
- When should I use neither Opus 5 nor Sonnet 5?
- When volume or latency decides the task rather than depth. Bulk classification, formatting and extraction across thousands of items belong on a smaller model in the same family, and interactive work where the fastest acceptable answer matters more than the best one is better served by a cheaper tier of any lab. A third signal is repetition: if you escalate the same prompt to Opus 5 every time, your inputs probably need work more than your model tier does.